Menu

I’m so excited to share with you my DIY Side Table Makeover With Naturally Distressed Wood!
diy side table - magrush.com


I am pretty excited about my ‘new’ side table for our family room. And by ‘new’ I mean, the newer version of our current side table. Oh how I love a little upcycle project!
diy side table - magrush.com


Here is what my side table used to look like. There was nothing wrong with it per se, I just wanted something brighter and a little different for our new space. Using spray paint and some old distressed wood, I turned this old side table into a modern yet rustic side table.
diy side table - magrush.com


I LOVE reclaimed wood and I was so excited to be able to use some on this project. The natural distressed tones are gorgeous and bring a whole new life to this little table.
diy side table - magrush.com


Just look at those beautiful natural tones, the greens and browns and grays. Swoon.
Diy Side Table - magrush.com


I started by applying one coat of spray primer, followed by 2 coats of White Spray Paint.
Diy Side Table - magrush.com


Now the story of where I got the wood is actually kind of funny. The previous owners of our home planted a raspberry bush on the side of our house. It was on the side of the house where our garbage cans live and it’s not a pretty space. Needless to say the raspberry bush was huge and not very prosperous so my husband decided to take it out.
Under the bush laid a worn and collapsed trellis. It was apparent that it had been under the bush for many years. To some it may have looked like a piece of junk, but the minute I saw the colors of the wood I saw potential and I couldn’t wait to get my hands on it!
I took the trellis apart and cut it into 17″ pieces. The size of the top of the side table. I gave them a good scrub and then laid them out to dry.
Diy Side Table - magrush.com


Using my trusting Gorilla Glue, I glued each piece onto the top of the side table. I didn’t use a guide, I just placed each piece down and let the natural colors create their own pattern.
Diy Side Table - magrush.com

I aligned the wood on the left side of the table, and because my cuts aren’t perfect, the right side turned out to be a little uneven. After the glue was dry, I used my Dremel to make one clean cut to even out the edges.
Next, I gently sanded the wood with an electric hand sander and then gave it 3 coats of Semi-Gloss Sealer.
diy side table - magrush.com
And now I have a crisp and clean new side table with tons of character




0 comments:

Post a Comment

 
Top